| Date of measurement | 2018-12-11 |
|---|---|
| Index of measurement run | 1 |
| Sample name | calibration_beads |
| Number of recorded events | 47 |
| Start time of measurement | 10:04:03 |
| Software | ShapeIn 2.0.5 | dclab 0.18.0.post6 | dclab 0.58.6 |
|---|---|
| Modules used | AcCellerator, FluorescenceModule |
| Flow rate in channel | 0.06 µL/s |
| Imaged chip region | channel |
| Medium used | 0.59% MC-PBS |
| Sample flow rate | 0.015 µL/s |
| Sheath flow rate | 0.045 µL/s |
| Unique setup identifier | ZMDD-AcC-fe3cdd-2a2250 |
| Width of microfluidic channel | 20 µm |
| Image height | 80 px |
|---|---|
| Image width | 250 px |
| Image x coordinate on sensor | 629 px |
| Image y coordinate on sensor | 512 px |
| Imaging frame rate | 1600 Hz |
| Light source device type | LED (ZMD L1) |
| Light source flash duration | 2 µs |
| Pixel size | 0.34 µm |
| FL1 description | 525/50 |
|---|---|
| FL2 description | 593/46 |
| FL3 description | 700/75 |
| Laser 1 output power | 8 % |
| Laser 1 wavelength | 488 nm |
| Laser 3 output power | 100 % |
| Laser 3 wavelength | 640 nm |
| Lower voltage detection limit | -1 V |
| Number of active channels | 3 |
| Number of active lasers | 2 |
| Number of available channels | 3 |
| Number of available lasers | 3 |
| Rolling median filter size for traces | 0 |
| Samples per event | 177 |
| Trace bit depth | 16 |
| Trace sample rate | 3.125e+05 Hz |
| Upper voltage detection limit | 1 V |
